Products

Your current location：Home > Products > Thermosetting polyester epoxy powder coating

Thermosetting polyester epoxy powder coating

Products

1.It is made of polyester resin, epoxy resin,pigment and filler, auxiliary agent; manufactured by mixing, squeezing, finegrinding, sieving and other working procedure.

2.Polyester epoxy powder coating seriesproduct has good decoration appearance, the coating is tough, durable andstrong adhesion, and also has good physical heat-resistance mechanismperformance.

3.This type powder coating has variousvarieties, including standard curing type, fast curing type and low temperaturecuringtype, gloss, semi gloss, matt, transparent, metal, wrinkle, sandtextured and other varieties.

4.It is widely used insurface coating of appliance, metal furniture, instrument and apparatus coat,hardware, [kitchen utensils and appliances, etc.

Technical index of powder coating(before curing)
No.	ltem	lndex
1	appearance	loose,no agglomeration,uniform color
2	gel time（180±2℃）	120~420S
3	horizontal fluidity	20~28mm
4	volatile matter content（105℃ 1h）	≤1%
5	particle size(180 residue on sieve)	≤0.5%
6	Standard curing type\fast curing\low temperature curing type	200℃×10min、200℃×5min、150℃×20min
Technical index of powder coating(after curing)
No.	ltem	lndex
7	color	conforms to standard shade(color)sample and within the allowable range
8	Appearance	flat and smooth,slight orange peel is allowable veins is clear
9	glossiness（60°）	High gloss=85%,flat51~84%,semi gloss15~50%,matt=14%
10	thickness	60um~80um
11	pencil hardness	1H-2H
12	adhesion	1mm6×6 zero grade
13	flexibility	≤∮3mm
14	impact strength	50Kg/cm(direct impact)
15	cupping test	≥6mm
16	neutral salt spray test	no obvious change in 500 hours
Note:2,3,5,7,9 in this table can be properly adjusted according to customer customer requirements